進口法蘭止回閥(德國OLES奧萊斯閥門)

【進口法蘭止回閥】詳細說明：

法蘭式止回閥是指依靠介質本身流動而自動開、閉閥瓣，用來防止介質倒流的閥門，又稱逆止閥、單向閥、逆流閥、和背壓閥。止回閥屬于一種自動閥門，其主要作用是防止介質倒流、防止泵及驅動電動機反轉，以及容器介質的泄放。止回閥還可用于給其中的壓力可能升至超過系統壓的輔助系統提供補給的管路上。止回閥主要可分為旋啟式止回閥(依重心旋轉)與升降式止回閥(沿軸線移動)。

這種類型的閥門的作用是只允許介質向一個方向流動，而且阻止方向流動。通常這種閥門是自動工作的，在一個方向流動的流體壓力作用下，閥瓣打開;流體反方向流動時，由流體壓力和閥瓣的自重合閥瓣作用于閥座，從而切斷流動。

其中法蘭式止回閥就屬于這種類型的閥門，它包括旋啟式止回閥和升降式止回閥。旋啟式止回閥有一介鉸鏈機構，還有一個像門一樣的閥瓣自由地靠在傾斜的閥座表面上。為了確保閥瓣每次都能到達閥座面的合適位置，閥瓣設計在鉸鏈機構，以便閥瓣具有足夠有旋啟空間，并使閥瓣真正的、全面的與閥座接觸。閥瓣可以全部用金屬制成，也可以在金屬上鑲嵌皮革、橡膠、或者采用合成覆蓋面，這取決于使用性能的要求。旋啟式止回閥在*打開的狀況下，流體壓力幾乎不受阻礙，因此通過閥門的壓力降相對較小。

Flanged check valve refers to the valve that automatically opens and closes the disc depending on the flow of the medium itself to prevent medium backflow, also known as check valve, one-way valve, counterflow valve, and back pressure valve. Check valve is an automatic valve. Its main function is to prevent medium backflow, reverse pump and drive motor, and release of container medium. Check valves can also be used in pipelines to supply auxiliary systems where pressure may rise above system pressure. Check valves can be divided into swing check valves (rotating according to the center of gravity) and lift check valves (moving along the axis).

The function of this type of valve is to allow the medium to flow in only one direction and to prevent the flow in the direction. Usually, the valve operates automatically, and the disc opens under the action of a fluid pressure flowing in one direction. When the fluid flows in the opposite direction, the disc acts on the seat by the fluid pressure and the self-coincidence disc of the disc, thus cutting off the flow.

Flanged check valve belongs to this type of valve, which includes swing check valve and lift check valve. Swing check valves have a hinged mechanism and a door-like disc that freely rests on the inclined seat surface. In order to ensure that the disc can reach the proper position of the seat surface every time, the disc is designed in a hinge mechanism so that the disc has sufficient swing space and makes the disc truly and comprehensively contact with the seat. Valve discs can be made entirely of metal, or can be metal inlaid with leather, rubber, or synthetic coverage, depending on the performance requirements. When swing check valve is fully opened, the fluid pressure is almost unimpeded, so the pressure drop through the valve is relatively small.

產品特點：

1.全通徑流線形設計，水頭損失小,不易堆積雜物。閥體整體環氧樹脂涂裝，使閥門的殼體*與介質隔離，有效防止閥門被介質腐蝕。

2.橡膠瓣由鋼板、鋼棒及強化尼龍布襯底，外層披覆橡膠制成,彈性好,使用壽命長。3結構簡單。 握作可靠。 維護簡便。

原理作用說明：

止回閥的啟閉件靠介質流動和力量自行開啟或關閉，以防止介質倒流。止回閥一般分為升降式、旋啟式、蝶式及臥式等四種類型，通式升降式止回閥應安裝于水平管路上，立式升降式止回閥和底閥一般安裝在垂直管路上，并且介質自下而上流動，旋啟式止回閥安裝位置不受限制，通常安裝于水平管路，但也可以安裝于垂直管路或傾料管路上。注意：止回閥只允許介質向一個方向流動，應特別注意介質流動方向，應使介質正常流動方向與閥體上指示的箭頭方向相*，否則就會截斷介質的正常流動。

    法蘭止回閥是指依靠介質本身流動而自動開、閉閥瓣，用來防止介質倒流的閥門，又稱逆止閥、單向閥、逆流閥、和背壓閥。止回閥屬于一種自動閥門，其主要作用是防止介質倒流、防止泵及驅動電動機反轉，以及容器介質的泄放。